Operation - AFRISO WaterControl 01.1 Betriebsanleitung

7

Operation

As long as no water is detected by the connected water sensors, the green
LED at the control unit lights solid. If one of the sensors detects water, the
product shuts off the water pipe with the shut-off ball valve and the red LED
at the control unit lights up. The control unit sends a message to the AFRI-
SOhome gateway when the shut-off ball valve changes its state. The user
receives a message from the AFRISO app that water has been detected.
7.1 Opening/closing the shut-off ball valve manually
Operation
1. Push down the hand
wheel.
2. Rotate the hand wheel to
position "A" in order to
close the shut-off ball
valve.
3. Rotate the hand wheel to
position "B" in order to
open the shut-off ball
valve.
WaterControl 01.1
EN
27