Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Operation
7.1
Adjusting the temperature
Operation
A
With the integrated thermo-
static mixing valve (A), the
flow temperature is adjusted
to a desired temperature by
adding water from the return.
1. Remove the protective
cap.
2. Set the temperature using
the temperature knob (B)
(see adjustment table).
3. Refit the protective cap.
4. Secure the protective cap
against unwanted adjust-
ments using a seal.
PrimoTherm® Floor
EN
B
21
Werbung
Inhaltsverzeichnis
Fehlerbehebung
