Inhaltsverzeichnis
Werbung
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
EN
Material
Aluminum
Joint Type
Single-Axis
Flexion
130⁰
Build Height
1.7 cm (0.67 in)
BUILD HEIGHT
Distance from the axis of rotation to the proximal dome: 17mm (0.67 in)
BENCH ALIGNMENT (TKA)
A. Determine the heel height
B. Determine the socket flexion
KNEE CENTER REFERENCE
Cross-hairs (⌖) indicate axis of rotation. Weight line can be anterior or posterior depending on desired overall alignment required.
STATIC ALIGNMENT
With the alignment reference line through the knee center, plantarflex or dorsiflex the foot until the load line is balanced between 1/3 heel
and 2/3 toe lever.
KNEE ALIGNMENT
More Stable = slide the knee posterior
More Dynamic = slide the knee anterior
Note: If the load line is too far anterior to knee center, it may become too difficult to initiate knee flexion.
If the load line is too far posterior to knee center, it may cause premature knee flexion.
(FIGURE 2)
(FIGURE 3)
(FIGURE 4)
Assembly Weight
980 g (34 mm Pylon Receiver) 990 g (Pyramid)
Patient Weight Limit
150 kg (330 lbs)
Warranty
3 Years
Torque (Clamp Screw)
10 N·m (7.4 ft-lbs)
C. The alignment reference line bisects through
the knee center
Werbung
Inhaltsverzeichnis
