Manual Preset; Storing Stations In Memory; Fm Station Automatic Preset: Ssm - JVC KD-LH5R Bedienungsanleitung

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
1
Select the FM band (FM1 – 3) you want
to store FM stations into.
F1
(FM 1)
2
Press and hold both buttons for more
than 2 seconds.
"SSM" appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
10
Each time you press the
button, the band changes
as follows:
F2 F3
(FM 2) (FM 3)

Manual preset

You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band.
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
F1
(FM 1)
2
Tune in to a station (in this example,
AM
of 88.3 MHz).
Each time you press the
button, the band changes
as follows:
F2 F3
(FM 2) (FM 3)
Press ¢
tune in to stations
of higher
frequencies.
Press 4
tune in to stations
of lower
frequencies.
AM
to
to