Storing Dab Services In Memory; Tuning In To A Preset Dab Service - JVC KD-LH5R Bedienungsanleitung

Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner.
2
Select the DAB band (DAB1, DAB2 or
DAB3) you want.
D1
(DAB 1)
3
Tune in to an ensemble you want.
4
Select a service of the ensemble you
want.
44
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
DAB FM/AM
Each time you press the
button, the DAB band
changes as follows:
D2 D3
(DAB 2) (DAB 3)
Press 5 (up) to select
the next service.
Press ∞ (down) to
select the previous
service.
5
Press and hold the number button
(in this example, 1) you want to
store the selected service into for
more than 2 seconds.
Selected band/preset number and
"MEMO" (memory) appear
alternately for a while.
6
Repeat the above procedure to
store other DAB services into other
preset numbers.
Notes:
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this occurs,
preset the DAB services again.
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see the column
on the left.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM
tuner are alternately
selected.
DAB FM/AM