Outline Diagram; Electrical Connection - Nibe EME 20 Installateurhandbuch

Outline diagram

OUTLINE DIAGRAM, CONNECTION EME 20
Solar panels

Electrical connection

CONNECTING COMMUNICATION
NOTE
All electrical connections must be carried out
by an authorised electrician.
Electrical installation and wiring must be carried
out in accordance with the stipulations in force.
The heat pump must not be powered when
installing EME 20.
• To prevent interference, sensor cables to external
connections must not be laid close to high voltage
cables.
• The minimum area of communication and sensor
cables to external connections must be 0.5 mm² up
to 50 m, for example EKKX, LiYY or equivalent.
• EME 20 restarts after a power failure.
CABLE LOCK
Use a suitable tool to release/lock cables in terminal
blocks.
EME 20 F-series | GB
Heat pump/indoor module or
control module
EME 20
distribution unit
Inverter
Internet
Electrical
3
1
1
4
1
2
NIBE Uplink
Own use
domestic electricity
Energy meter
own consumption
(optional)
Energy meter
Net owner
3
1
2
2
2
2
4
1
3
3
F
35