Technical Data - Scheppach BC52PB Originalbetriebsanleitung

4. Maintenance and storage
• Keep all nuts, bolts, and screws tight to be sure the
appliance is in safe working condition.
• Check the grass catcher frequently for wear or dete-
rioration.
• Replace worn or damaged parts for safety.
• For rotary mowers, ensure that only replacement
cutting means of the right type are used.
– Never store the equipment with petrol in the tank
inside a building where fumes can reach an open
flame or spark;
– Allow the engine to cool before storing in any en-
closure;
– To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free
of grass, leaves, or excessive grease;
– If the fuel tank has to be drained, this should be
done outdoors.
Special satety warning
1. Grip the handles of the brush cutter firmly with both
hands. If you suspend the work, place the throttle
into the idling position.
2. Always be sure to maintain a steady, even posture
while working
3. Maintain the speed of the engine at the level re-
quired to perform cutting work and never raise the
speed of the engine above the necessary level.
4. If the grass gets caught in the blade during opera-
tion, or if you need to check the unit or refuel the
tank always be sure to turn off the engine.
5. If the blade touches a hard object like a stone im-
mediately stop the engine and check if something
is wrong with the blade. If so, replace the blade
with a new one.
6. If someone calls out while working, always be sure
to turn off the engine before turning around.
7. Never touch the spark plug or plug cord while
the engine is in operation. Doing so may result in
being subjected to an electrical shock.
8. Never touch the muffler, spark plug or other me-
tallic parts of the engine while the engine is in
operation or immediately after shutting down the
engine. Doing so may result in serious burns.
9. When you finish cutting in one location and wish to
continue working in another spot, turn off the engi-
ne and turn the machine to have the blade facing
away from your body.
10. Check that the cutting attachment stopped turning
under the engine idle before starting to use the
machine.

6. Technical data

BC52PB
Technical data
Cutting data grass trimmer
Cutting circle
diameter of line
mm
Cutting line
diameter mm
Cutting line length
m
Max. cutting
speed max. min
-1
Cutting data brush cutter
Cutting circle
diameter of blade
mm
Cutter balde
thickness mm
Teeth quantity
Max. cutting
speed max. min-1
Schnittdaten saw blade
Cutting circle
diameter of blade
mm
Cutter balde
thickness mm
Teeth quantity
Max. cutting
speed max. min-1
Power unit
Displacement ccm
Max. engine output
W
Fuel tank capicity l
Engine type 2-stroke engine, air-cooled
Weight kg
Subject to technical changes!
concerning noise
Information
according to relevant standards:
Sound pressure L = 97,1dB(A)
pA
Sound power L = 115,3 dB(A)
WA
Uncertainty K = 3 dB(A)
PA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration:
Grass trimmer: A = left 5,83 m/s
hv
Brush cutter: A = left 4,47 m/s
hv
Uncertainty K = 1.5 m/s2
PA
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
In these operating instructions we have marked the
places that have to do with your safety with this sign:
m
450
2 x 2,8
4
7300
255
1,4
3
8500
203
1,8
26
10000
51,7
1300
1,0
8.2
emission measured
right 4,55 m/s
2 2
right 2,75 m/s
2 2
GB 25