Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Safety Warnings - Ryobi RPT184515 Übersetzung Der Originalanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc,
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
POLE HEDGE TRIMMER SAFETY WARNINGS
Keep all parts of the body away from the cutter
blades. A moment of inattention while operating the
product may result in serious personal injury.
Carry the pole hedge trimmer by the handle with
cutter blade stopped. When transporting or storing
the pole hedge trimmer always fit the cutting device
cover. Proper handling of the pole hedge trimmer will
reduce possible personal injury from the cutter blades.
Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring. Cutter Blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
2
| English

ADDITIONAL SAFETY WARNINGS

Clear the work area before each use. Remove all
objects such as cords, lights, wire, or string which can
be thrown or become entangled in the cutting means.
Beware of thrown objects; keep all bystanders, children,
and pets at least 15 m away from work area.
Check constantly for persons or animals behind or
inside any hedge or bush you intend to trim.
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Inspect the machine before each use. Check for loose
fasteners, etc. Make sure all guards, and handles are
properly and securely attached. Replace any damaged
parts before use.
Do not modify the product in any way.
Do not allow children or untrained individuals to use this
unit.
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
Wear heavy long trousers, boots, and gloves. Do not
wear loose fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Do not use the product when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can
result in serious injury.
Before starting the product, make sure the cutting
blades will not come in contact with anything.
Ensure that the product is correctly located in a
designated working position before starting the product.
While operating the pole hedge trimmer, always hold it
firmly with both hands by the two handles and ensure
that the operating position is safe and secure. The
manufacturer does not recommend the use of steps or
ladders.
Use the harness if it is supplied with your pole hedge
trimmer. It will assist you to support the weight of the
product during use and whilst moving between trimming
positions. Carefully adjust the harness to fit comfortably.
Identify the quick release mechanism and practice
using it before you start using the product. Its correct
use may prevent serious injury in the case of an
emergency. Never wear additional clothing over
the harness or otherwise restrict access to the quick
release mechanism.
To protect yourself from electrocution, do not operate
within 10 m of overhead electrical lines.
Never use the pole hedge trimmer near fencing, posts,
buildings, or other immovable objects.
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. Never
touch blade or service unit unless the battery pack is

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Opt1845

Inhaltsverzeichnis