Intended Use - VOLTCRAFT MSW 150 Bedienungsanleitung

4. INTENdEd uSE

The inverter produces a sine-like alternate voltage of 230 v/AC, 50 Hz from a direct voltage
(depending on inverter version, either 12 v/DC or 24 v/DC).
• Item no. 1277756, 1277761, 1277764: Operating voltage 12 v/DC
• Item no. 1277765, 1277766, 1277767: Operating voltage 24 v/DC
Since the mains voltage is, however, only sine-like, but not precisely sine-shaped, we cannot
guarantee that all electrical consumers can be operated via the inverter without problems.
The maximum output of the inverter and other important indices can be found in chapter
"Technical Data" at the end of these operating instructions.
Electrical consumers with a higher rated power intake than the maximum permanent output of
the inverter must not be connected.
When connecting electrical consumers (e.g. drill, refrigerator, etc.), to the inverter, observe that
they often need a higher output than indicated on the rating plate of the consumer for a short
period when switching on or starting up. The inverter therefore briefly supplies a higher output.
The inverter switches off on its own when the input voltage drops below a specific value. This
protects a car battery from harmful deep discharge.
The safety notes and all other information in these operating instructions always have to be
observed! Read these operating instructions with care before connection and commission-
ing. Keep these operating instructions or pass them on to a third party only together with this
product.
Any use other than that described above can damage the product and may involve additional
risks such as short circuit, fire, electric shock, etc. No part of this product must be modified or
converted!
This product complies with the statutory national and European requirements.
24