Appliance Model Overview; General Information; General Notes On The Manual And Safety; Disclaimer - AHT RIO Serie Betriebsanleitung

1 | General information

Appliance model overview

Commercial refrigeration appliance
Model Type R-290
RIO
RIO H 68 G B 830N
RIO H 100 G B 830N
RIO H 125 G B 831N
RIO H 150 G B 832N
RIO S 68 B 830N
RIO S 100 B 831N
RIO S 125 B 832N
RIO S 150 B 833N
RIO S 175 B 835N
*Some models may deviate from these figures. Please refer to the shipping documents for detailed information.
These must be available from the operating company.
Subject to technical change
1 General information
1.1 General notes on the manual
and safety
This operating manual (referred to as the "manual")
forms an integral part of the appliance and must be
read to ensure safe and efficient operation. The
"Safety" section provides information on important
safety measures to protect persons, property, and ma-
terials. The various sections contain warnings/notes
related to the tasks they set out.
Instructions can be found in electronic form on our
website at http://www.aht.at .
This manual is intended for use by the following audi-
ences:
–
Operating companies
–
Operating personnel
–
Qualified staff: AHT service partners, AHT ser-
vice engineers, AHT customer service, AHT in-
stallation service
Personnel: This term is used when the instruction in
question is intended for use by all audiences.
Read the manual
–
Keep this manual for future reference.
–
This manual must be available and accessible to
on-site personnel.
–
Personnel must read through the manual carefully
prior to use.
All illustrations are indicative only.

1.2 Disclaimer

All information in this manual has been compiled in
accordance with the standards and legal regulations
applicable at the time it was written, as well as the ex-
perience of the manufacturer and qualified staff. The
manufacturer assumes no liability for damage to per-
sons, materials, or property (appliances, goods, etc.)
resulting from:
24 / 436
External dimensions [mm]
Length x depth x height
680 x 650 x 880
1000 x 650 x 880
1250 x 650 x 880
1500 x 650 x 880
680 x 650 x 880
1000 x 650 x 880
1250 x 650 x 880
1500 x 650 x 880
1750 x 650 x 880
–
non-compliance with the manual and the regula-
tions/safety regulations it contains.
–
non-compliance with the locally applicable statu-
tory safety regulations.
–
improper use (misuse).
–
the use of unauthorised and untrained personnel.
–
technical modifications not authorised by the
manufacturer.
–
changes to factory settings not authorised by the
manufacturer.
–
the use of spare parts not approved by the manu-
facturer.
–
the use of accessory parts not approved by the
manufacturer.
–
modifications, attachments, and installations not
authorised by the manufacturer. Only modifica-
tions, attachments, and installations authorised by
the manufacturer are permitted.
–
failure of the power supply or electrotechnical
safety devices.
–
typographical and printing errors.
Non-compliance with the above points will result in the
warranty being voided. The contractually agreed obli-
gations, the general conditions of sale and delivery of
"AHT Cooling Systems GmbH" (referred to as "AHT")
and, in addition, the statutory provisions applicable at
the time of conclusion of the contract shall apply.
Technical changes and errors reserved.
The local trade and safety regulations/provisions and
fundamental health and safety requirements for the
appliance apply.
AHT Cooling Systems GmbH | en
Appliance net
weight * [kg]
53
63
74
79
51
61
69
77
88
405862_1_0819