Seite 2
AHT Cooling Systems GmbH Beiblatt zu: Originalbetriebsanleitung Supplement to: Translation of the original instructions Supplément à : Traduction de la notice originale 2 / 16 398051_4_0119...
| AHT Cooling Systems GmbH Kühlfunktion ein- und ausschalten | 1.1.1 1.1.1 Kühlfunktion ein- und ausschalten Stop bit Die Kühlfunktion nur für Reinigungszwecke ausschal- Minimum TimeOut 60ms ten. Kühlfunktion mind. 3 s drücken. ausschalten „OFF“ und die Ist-Temperatur (Abtauen von Hand...
1.1.4 | Halbautomatische Abtauung AHT Cooling Systems GmbH | de Fehlercode kann NICHT quittiert werden. Programmierebene verlassen Der Fehlercode erscheint abwechselnd mit der Ist- Temperatur so lange bis der Fehler behoben wurde. – 5 s drücken. Maßnahmen zur Fehlerbehebung bei Auftreten von Alarmanzeigen siehe →Störung im Betrieb.
| Supplement Elektronic contoller CAREL AHT Cooling Systems GmbH | en Supplement Elektronic con- toller CAREL to the operating instructions – SNr. 347363 Commercial refrigerating appliance Model types-overview Commercial refrigeration appliance Fig. 2: Operating elements and displays Model Type External Maximum...
Seite 9
| AHT Cooling Systems GmbH Switch the cooling function on and off | 1.1.1 1.1.1 Switch the cooling function on and off Switch off the cooling function for cleaning purposes only. Press for at least 3 s. Switch off cooling...
Seite 10
1.1.4 | Semiautomatic defrost AHT Cooling Systems GmbH | en 1.1.4 Semiautomatic defrost Press for at least 5 s. Start semi- „dfb“ appears briefly. Then automatic defrost: „dEF“ and the symbol shown on the display. After semi-automatic defrost, the unit automatically re- turns to normal operation.
Seite 12
| Supplément Régulateur électronique CAREL AHT Cooling Systems GmbH | fr Supplément Régulateur électronique CAREL au manuel d'utilisation – Réf. 347363 Appareil professionnel de réfrigéra- tion/congélation Vue d'ensemble des mo- dèles d'appareil Fig. 2: Éléments de commande et écrans Appareil professionnel de réfrigération/congélation Élément de...
Seite 13
| AHT Cooling Systems GmbH Activation et désactivation de la fonction de refroidissement | 1.1.1 Écrans (N°/ Signification de l’affichage Symbole) Alarme clignotant Élément de Fig. 4: Schéma du système de bus Alarme commande Câble de bus Câble patch CAT 5-S/FTP...
Seite 14
1.1.4 | Dégivrage semi-automatique AHT Cooling Systems GmbH | fr Code de défaut Signification – Appuyer sur jusqu’à ce que Sonde de température S1 « H0 » apparaisse. défectueuse Appuyer ensuite sur Sonde de température S2 défectueuse Affectation de l'adresse de bus Sonde de température S3...
Seite 15
| AHT Cooling Systems GmbH Afficher l'alarme et l'acquitter | 1.1.6 398051_4_0119 15 / 16...
Seite 16
AHT Cooling Systems Brasil Ltda. Rua Onório Bortolato | 1065–Bairro Pedreiras Navegantes – SC - 88375-000 | Brasil Phone: +55 (0) 11 4702 / 30 99 | Fax: +55 (0) 11 4702 / 71 68 | Email: info@br.aht.at AHT Cooling Systems (Changshu) Co., Ltd.