Cut Opening In Worktop - Atag HL62..E Bedienungsanleitung

INSTALLATION GUIDE

Cut opening in worktop

Saw the opening in the worktop. This should be done very accurately
(see table). Also saw out any partitions that may be present.
The distance from the saw line to the rear wall and/or side wall is
indicated in the table.
Table
Type of hob
Appliance width x depth
595 x 510 mm
Installation height from top of worktop
56
Cut out dimensions width x depth
560 x 490 mm
Distance from saw line to rear wall
Distance from saw line to side wall
Space to be left free around the appliance
cabinet
min. 650 mm
min. 450 mm
min. 40 mm
build in HL62..E
cooker hood
min. 600 mm
Ceramic hob
HL62..E
x
x
x
50 mm
50 mm
min. 40 mm
side wall
79