Instructions For Use; Turning The Machine On/Off; Program Settings - SISER TS-ONE Gebrauchsanweisung

5 INSTRUCTIONS FOR USE

5.1 Turning the Machine On/Off

Switch on the machine using the main switch 1/0 (ON/OFF). In position 1 (ON), the button is lit.
ON/OFF switch
To turn the machine off just turn the switch to 0 (OFF).
Remember that after turning the machine off it takes two hours for the platens
to cool.

5.2 Program Settings

To set the work parameters, use the control panel with LED-display and signal led.
P3 Increase
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Display
P1 Selection Parameter
P3 Decrease
TS-One Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
Work parameter
setting signal led
L1 Temperature
L2 Time
L3 Set
TS
ONE
5
EN
43