Important Safety Instructions - SISER TS-BASE Gebrauchsanweisung

TS
BASE

IMPORTANT SAFETY INSTRUCTIONS

DURING USE OF THE PRESS, IT IS ALWAYS NECESSARY TO FOLLOW SOME BASIC PRECAUTIONS,
INCLUDING THE FOLLOWING:
EN
Read the entire instruction manual before using the press.
Use the press exclusively for printing textile items or other suitable products without heat
sensitive components and not treated with chemical additives.
Keep the press away from rain, humidity, dirt, dust, direct sunlight, impact or mechanical
vibrations and from easily flammable or explosive materials.
To switch off the press, never pull the power cord, instead always use the ON/OFF switch.
If the machine is not used for a long time, cautiously disconnect the power cord by removing
the plug from the socket.
In the opening position, the power cord must not come in contact with the heating plate.
Never use the press with a faulty cable or if malfunctioning or damaged.
Never take it upon yourself to remove the press instrument box: if problems arise, contact our
specialist person directly during normal working hours on +39 0444 287960.
Opening the instrument box of your own accord causes all rights to warranty to become void.
Do not position the press in places where children or third parties can access it without
supervision. To prevent burns or crushing, respect the minimum distance from external objects
or from children of at least 1.5 m.
To transport, never grab the press by the instrument box, since the electronic components and
plastic elements are found beneath. Always hold the press by the lower plate or directly by the
pedestal. The press can only be transported when it is completely cold and inside its original
packaging and box.
Before connecting the pressure to the electricity mains, check the working voltage corresponds
to the mains voltage of 230V. The socket must have fuse protection with at least 16 Amperes.
Connect a single machine to each socket and do not use extensions.
Never leave the machine unguarded during the printing process (danger of fire)!
During machine loading, check that this is completely open to prevent burns.
PRESERVE THIS MANUAL.
TS-BASE Manual for use and maintenance
20 This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 20/3 - Last updating 10/2019