Descrption Of The Machine; Operation Of Machine; Mechanical And Operating Information - SISER TS-ONE Gebrauchsanweisung

2 DESCRIPTION OF THE MACHINE

2.1 Operation of Machine

The TS-ONE machine is designed and manufactured intended solely for the transfer of
heat-activated materials onto fabrics or other substrates, compatible with the working
temperatures. The machine is intended for professional use.
The manual machine is designed to be used by a single operator; the maximum
temperature of 220°C may never be exceeded.
Do not operate the machine under any conditions or for any other
implementation than specified in this manual. SISER s.r.l. is not responsible for
any breakdowns, malfunctions or injuries due to failure to comply.

2.2 Mechanical and Operating Information

• the stand on which the fixed arm is connected
• the u-shaped fixed arm that holds the mobile arm on one side and the fixed base platen on
the other side
• the mobile arm supporting the heated platen at its free end
• the handle
• the control panel
Control panel
Upper Rotating Arm
Lower Plate
Adjusting Pressure
Fixed arm
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
TS-One Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
Handle
Upper Heating Plate
Stand
31
TS
ONE
2
EN