Safety; General Recommendations; Proper And Improper Use - SISER TS-ONE Gebrauchsanweisung

3 SAFETY

3.1 General Recommendations

Aspects linked to machine safety were taken into consideration during the design stages,
identifying the most suitable solutions to ensure safe use.
Do not tamper with and/or replace parts of the machine without the
manufacturer's express authorization.
Be advised that any alteration made by the user will result in voiding the CE Declaration of
Conformity and relieves SISER S.r.l. of any responsibility for the machine.
The TS-ONE machine is designed for a 230 V power supply. This voltage is dangerous in case
of contact. All installations, maintenance and repairs must be made by certified, competent
personnel, licensed to work on electrical equipment.
Any maintenance and/or repairs must only be carried out after positioning the
switch on zero, unplugging the machine from the electrical power supply and
with the heating elements at room temperature.
The operator's workplace must be kept clean, neat and free of objects that could limit the
range of movement of the machine.

3.2 Proper and Improper Use

The TS-ONE machine is designed and manufactured intended solely for the transfer of
heat-activated materials onto fabrics or other substrates, compatible with the working
temperatures.
Do not apply heat transfer materials to flammable materials or fabrics that
have been in contact with solvents, flammable or combustible substances.
Be aware that the working temperature could be a cause of fire.
Proper function and the safe operation of the machine also depends on its installation site.
Do not use the machine in humid, wet or dusty environments.
The machine is not designed for outdoor use.
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
TS-One Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
TS
ONE
3
EN
33