Retiring The Machine, Demolition And Disposal - SISER TS-ONE Gebrauchsanweisung

7 RETIRING THE MACHINE, DEMOLITION AND DISPOSAL

If the machine has to be demolished, it must be separated into similar parts, which must be
separately disposed of in accordance with legislation in force.
The replaced parts must not be disposed of in the environment, but disposed of according to
legislation in force in the location of machine use.
The basic components of the machine parts are steel, stone wool, aluminium and plastic.
The symbol
depicted on the machine means the waste is subject to "separate collection". Therefore, the
user must take (or have taken) the waste material to a waste sorting facility run by local
municipalities, or return it to the retailer on purchase of a new, equivalent machine.
In Italy, illegal disposal of the product by the user is subject to a fine pursuant to Art. 255 and
thereafter of Legislative Decree no. 152/06.
INFORMATION FOR THE USERS
Separate collection of this machine at the end of its life is organized and managed by the
manufacturer. The user who wishes to dispose of this equipment should therefore contact the
manufacturer and follow the instructions adopted by the latter to ensure separate collection of
the machine at the end of its life.
Correct separate collection for recycling, treatment and environmentally compatible disposal
of waste material contributes to the prevention of possible negative effects on health and
the environment, and facilitates the reuse and/or recycling of the materials of which it is
composed.
Improper disposal of the product by the owner is a punishable violation of the regulations in
force.
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
TS-One Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
TS
ONE
7
EN
47