Use And Safekeeping Of Manual; Reference Standards - SISER TS-ONE Gebrauchsanweisung

1.3 Use and Safekeeping of Manual

This manual is written for personnel assigned to perform the activities as described within 1.1.
Read his manual very carefully before shipping, installing, using, and performing
any maintenance and before disposing of the equipment.
Before performing any of these activities, particularly before using the machine, make sure all
users have completely understood these instructions including the meaning of the symbols as
they pertain to the machine. Complete understanding of the instructions as described in this
manual is necessary for safe use of the machine.
The manual should be kept, in a safe place, where it will always be available for consultation.
In case of loss or damage, a replacement manual may be requested directly from:
SISER S.r.l.
Viale della Tecnica, 18
36100 Vicenza, Italy
tel. +39 0444 287960
fax +39 0444 287959
The manual is an integral part of the machine and as such must be preserved
for the entire life of the machine and transferred to any other user or
subsequent owner.

1.4 Reference Standards

The TS-ONE machine is equipped with electrical parts operating at a voltage ranging between
50 V and 1000 V alternating current, and is subject to the Low Voltage Directive 2014/35/EU
and the Electromagnetic Compatibility Directive 2014/30/EU.
Users must remember that in addition to following the instructions in this manual,
the legislation on the subject of safety within your country must also be adhered to.
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
TS-One Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
TS
ONE
1
EN
29