Assembly Instructions - SISER TS-ONE Gebrauchsanweisung

4.2 Assembly Instructions

The following tools are necessary to assemble the press:
• 6 mm wrench (supplied by Siser)
• 4 mm wrench (supplied by Siser)
1. Open the packaging.
2. Rest the press structure on one side on a support base.
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
TS-One Manual for use and maintenance
Mod. PRD 20/3 - Last updating 10/2019
TS
ONE
4
EN
37