Error Messages - Sentiotec K2 Next Montage- Und Gebrauchsanweisung

Instructions for use for the user

12.3. Error messages

Error messages in the display 6
An error message indicates an electrical malfunction of the system. The sauna
control unit is no longer operational.
1. Note the error message.
2. Switch off the sauna control unit.
3. Switch off the main fuse of the sauna control unit in the fuse box.
4. Contact customer service.
Error Description
E-F1 Short circuit/broken wire/
heater sensor defective.
E-12 Broken wire or damage
to the excess tempera-
ture protection.
E-PI Heater sensor/excess
temperature protection
incorrectly connected.
WORLD OF WELLNESS
Cause/rectification
See item 5. Troubleshooting for the
installer on page 14
See item 5. Troubleshooting for the
installer on page 14
See item 5. Troubleshooting for the
installer on page 14
p. 23/26
EN