Product Description; Scope Of Delivery; Product Functions - Sentiotec K2 NEXT Montage- Und Gebrauchsanweisung

Instructions for installation and use p. 8/26

3. Product description

3.1. Scope of delivery

● Single-component sauna control unit
● Heater sensor with integrated excess temperature fuse
● Sensor wires (3 m)
● Installation accessories

3.2. Product functions

The sauna control unit K2 Next is used for operating and controlling sauna heaters
within a temperature range spanning 40 °C to 125 °C above the heater. The sauna
control unit functions according to a single sensor system, and features an ex-
cess temperature fuse with a shut-off temperature of 139 °C above the heater.
If the sauna cabin temperature is lower than the preset temperature, the sauna
control unit switches on the sauna heater. The sauna heater heats up. If the
sauna cabin temperature exceeds the preset temperature, the sauna control unit
switches off the sauna heater. The sauna heater will not heat up again until the
sauna cabin temperature falls below the preset temperature.
For safety reasons, the heating period limit automatically switches off the sauna
control unit after a heating period of 6 hours.
The sauna control unit K2 Next has a preset time function. The preset time can
be set to increments of 15 minutes. The minimum preset time is 15 minutes.
The maximum preset time totals 23 hours and 45 minutes. Once the preset time
has elapsed, the sauna heater switches on.
WORLD OF WELLNESS