Product Assembly; Before Use - cecotec Ready Warm Space Serie Bedienungsanleitung

3. PRODUCT ASSEMBLY

Place the radiator upside-down on a stable surface where it cannot fall and follow the below
instructions:
1. Unscrew the wing nuts from the u-shaped bolt.
2. Introduce the bolt between the first and second fin.
3. Introduce the bolt's ends into the holes of the castor-mounting plate.
4. Screw the wing nuts back to the bolt and tight them in order to fix the castor mounting
plate to the radiator.
5. Repeat these steps on the other part of the radiator to assemble the back castors.

4. BEFORE USE

• Place the radiator on a flat, stable surface.
• Set the power switch and temperature knob to 0.
• Plug the appliance to a properly-earthed power outlet.
ENGLISH
READY WARM SPACE 13