Beko TKM 8961 K Bedienungsanleitung Seite 13

2 Use
2
1
Place the coffee-making pot (15) into the
left compartment heating surface (14).
Press the left compartment coffee-mak-
ing button for 1 serving (4).
The cup size LED will show the level to which the product is set.
Repeat the water amount adjusting process when you change the cup size.Repeat the water
amount adjusting process when you change the cup size.
2.2 Coffee making
Put the desired amount of coffee and
sugar (up to 3 servings) into the coffee-
making pot (15).
Turkish Coffee Machine / User Manual
3sn
Once the water pumping process is over,
press and hold the same button for 3 sec-
onds to end the coffee-making process
and drain the water inside the coffee-
making pot (15) into your cup.
2
1
Place the coffee-making pot (15) in its
slot. Slightly press the button that is
found on the compartment where you
have placed the coffee-making pot (15)
and that shows the number of servings
based on the amount of coffee you have
added.
- The light of the selected button will light
in white.
If the water you have poured into your
cup is too little or too much, press the
cup size adjustment button to set it to
small, medium or large (9). You can press
the cup size adjustment button (9) to
switch between level. Once the LED of
the desired cup size turns on, end the
process.
Once the coffee-making process is com-
plete, an audio warning will be heard and
the LED of the relevant coffee-making
button will flash in white. Once the LED
turns dull white, slightly pull back the cof-
fee-making pot (15) to remove it and pour
the coffee into your cup.
13 / EN