VOLTIMA VSI-Serie Montage- Und Bedienungsanleitung Seite 98

98 VOLTIMA VSI/VST Series
Troubleshooting – Error codes
Symbols
Attention!
Eliminate sources of error immediately!
Make sure that the source of the error has been fixed. Turning on several times in case of any
problems, can destroy the device.
In particular, short-circuits and revers polarity must be avoided in any case, as these can
destroy the device despite the protection.
Explanation
LED lights up green to indicate that the unit is ready for
operation and that AC voltage is present at the two
output sockets.
LED lights up red if connected devices load the inverter
due to excessive current values or in the event of a
short circuit.
LED lights up yellow when the inverter is overheated.
Alarm Tone sounds when the unit has switched off due
to a malfunction.