VOLTIMA VSI-Serie Montage- Und Bedienungsanleitung Seite 67

Warning!
Important installation instructions!
In order to avoid danger, in particular due to fire hazard, injury and electric shock, the
following instructions must be observed:
•
The device can be installed both horizontally and vertically.
•
Never cover the ventilation inputs or outputs and ensure generally good
ventilation. The installation location of the inverter must always be generously
ventilated: Make sure that the distances between ventilation and
outputs and the nearest surface are at least 25 cm.
•
Install or screw the inverter only on fixed mounting surfaces.
•
Avoid pulling cables.
•
Hold all cables well during assembly and disassembly.
•
Always connect the input voltage first and then switch on the inverter.
•
Avoid direct long sunlight and installation near heat sources.
•
Avoid dust, moisture and corrosive or combustible substances near the inverter.
•
The inverter becomes warm during operation. Avoid being close to temperature-
sensitive items.
•
Do not drop the inverter and avoid impacts.
•
Do not place any objects on the inverter.
•
Do not open the device.
•
Use only dry cloths for care. Turn off the inverter beforehand.
•
Turn off the inverter beforehand during all work.
•
Always use empty tubes or cable bushings for sharp-edged penetrations.
•
Never install the 230V output line and DC power lines together in the same line
channel.
•
The device is to be operated only to the exclusion of any damage.
•
The inputs and outputs of the ventilation must always be kept free.
•
When working on the device, the power supply must be interrupted.
•
Use commercially available accumulators of the specified rated voltage. Installation
only in permanently installed systems.
•
The specified minimum battery capacity must be adhered to.
•
Use the supplied battery cable.
•
If you need a longer battery supply line, follow the minimum cross-sections and
maximum lengths specified by us.
•
Use the Voltima inverters only in technically perfect condition.
VOLTIMA VSI/VST Serie 67