User Manual; Intended Use; Product Description; En Shower And Toilet Chair - Invacare Lima H263 Gebrauchsanweisung

Invacare® Lima
• Footrest (2x)
• Pelvic restrain belt plus screw and washer
•

User manual

8 Intended Use

This product is intended to be used as an aid for showering,
going to the toilet and for all personal hygiene activities with
or without assistance.
Users are any adults and adolescents with restricted or
limited mobility (e.g.: legs and/or hips) or limited muscle
strength. If used without an assistant, the users must be able
to keep their own balance.
Indication
Restricted or limited mobility (e.g.: legs and/or hips) or
having balance issues to stand up or walk due to transitional
or permanent disabilities.
There are no contraindications known when using the
product as intended.
The maximum user weight is 135 kg.

9 Product Description

Invacare® Lima shower- and toilet chair comes with a
space-saving folding-frame, height adjustable footrests and a
toilet pan. The flip-up armrest, backrest and the seat plate
are softly padded, the seat plate provides a hygiene cut-out
whose opening can be positioned in four directions. The
device comes in two models: A mobile model which can be
pushed using the push handle and the 24" wheels-models
for self-propelling.
10 Assembly (Fig. 2 — 7)
CAUTION!
Risk of Pinching
– Take care during assembly.
1. Lift the carton j and the frame with backrest k out of
the transport carton. (Fig. 2)
2. Open the shower and toilet chair by pushing down on
the crossbraces l. (Fig. 3)
3. Place toilet pan holder m onto the frame by inserting
the four toilet pan holder hooks into the four holes on
the frame tubing. Insert the toilet pan from the rear
side. (Fig. 4)
4. Position seat o on frame and push down to lock seat
onto frame. (Fig. 5)
5. Insert the top of the outward-facing footrest p into the
frame of the shower and toilet chair. Then slide and
push down to lock in place. (Fig. 6)
6. Prepare the procedure for the other footrest assembly.
(Fig. 6)
7. Position the two pelvic restraint belts halves on the seat
frame.
8. Install the two mounting screws and locknuts q to
secure the two halves of the pelvic restraint belts to the
seat frame. (Fig. 7)
11 Usage
CAUTION!
Risk of Trapping/Squeezing
– Do not reach into the folding mechanism.
– Do not put fingers between spokes or between
wheel and seat.
4
WARNING!
Risk of falling
– Apply the brakes in parked position and for
transfer
Unfolding the Shower and Toilet Chair (Fig. 3, 9, 4, 12, 13)
1. Open the shower and toilet chair by pushing down on
the crossbraces l. (Fig. 3)
2. Raise armrests for easier access to frame by squeezing
the armrest release lever toward arm tubing and lift.
(Fig. 9)
3. Place toilet pan holder onto the frame by inserting the
four toilet pan holder hooks into the four holes on the
frame tubing. Insert the toilet pan from the rear side.
(Fig. 12)
4. Position the seat on the frame and push down to lock
seat onto the frame. (Fig. 13)
The padded seat plates' opening may be positioned
in any desired direction. (Fig. 13)
Folding the Shower and Toilet Chair
1. Raise armrests for easier access to frame by squeezing
the armrest releaser lever toward arm tubing and lift.
2. Remove seat plate from frame by pulling up on the seat.
3. Remove the toilet pan from the toilet pan holder.
4. Remove the toilet pan holder from the frame by lifting
the four toilet holder hooks out of the four holes on
the frame tubing.
5. Fold the shower and toilet chair by lifting up on the
crossbraces.
Adjusting the Footrests (Fig. 8)
1. Lift front of footplate up until footplate adjustment pin
disengages from hole.
2. Slide footplate to alternate footplate adjustment height.
3. Push down on front of footplate until footplate
adjustment pin engages into desired pin hole.
Positioning Swing-Back Arms (Fig. 9)
1. Unlock the swing-back arm by pressing the arm release
lever towards the arm frame.
2. Pull the front of the swing-back arm straight up/out of
the arm socket and push back towards the rear of the
shower and toilet chair.
3. To lock the swing-back arm, pull the swing-back arm
forward and then push downward into the arm socket
until an audible "click" is heard.
Using the Wheel Locks
1. Ensure the shower and toilet chair is not moving before
engaging the wheel locks.
2. To engage wheel locks, push the wheel lock handle
forward.
3. Disengage the wheel locks by reversing step 2.
Adjusting the Wheel Locks (Fig. 10)
WARNING!
Risk of Injury
– This procedure must be performed only by a
service person
1. Loosen the two socket screws that secure the wheel lock
assembly to the shower and toilet chair.
Any wheel lock adjustment should embed the wheel
lock shoe at least 5 mm into the tire when engaged.
2. Adjust the position of wheel lock until 5 mm
measurement is obtained for correct wheel lock
adjustment.
3. Securely tighten the two socket screws.
1525734-C