Product Description; Cleaning And Maintenance - Concept VS5130 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1 Air outlet
2 Control panel with display
3 Air inlet
4 Base
E D
H
F
G
A C
B.
E D F G
Model VS5130
36
DISPLAY AND REMOTE CONTROL
DESCRIPTION
A Sleep mode indicator
B Natural breeze mode indicator
C Timer indicator
D Airflow speed setting
E ON/OFF button
F Timer
G Oscillation
H Mode setting
1
A
B.
2
E F
3
4
Model VS5140
VS5130 | VS5140
OPERATING INSTRUCTIONS
Connect the power cord to the mains. The appliance is in standby mode.
ON/OFF button (E)
If the appliance is switched off, press the (E) button to switch it to standby mode (two dashes "--" are displayed). Press
this button a second time to switch on the appliance at the lowest airflow speed (F1). Press this button a third time to
switch back to standby mode. After 60 seconds of inactivity the appliance automatically switches off.
Airflow speed setting (D)
Press this button to change the airflow speed in 3 levels (F1, F2, F3).
Note: When the appliance is switched off, the last set airflow speed is not saved. When switched on again, the appliance
always starts at the lowest speed (F1).
Mode setting (H) - only when using the remote control
Press this button to choose from 3 saved modes:
1. Basic: no indication on the display. It is necessary to set the airflow level manually (this mode is set after starting
the appliance).
2. Sleep: the icon (A) is displayed.
3. Natural breeze: the icon (B) is displayed.
Timer (F)
Use the timer button (F) to set the required operating time from 0 to 15 hours in 1-hour intervals.
Oscillation (G)
Use the oscillation button (G) to switch on/off the rotation of the appliance.

CLEANING AND MAINTENANCE

Before each cleaning of the appliance, unplug the power cord from the electrical outlet!
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Clean and inspect the input and output grids of the appliance frequently to ensure good operation of the appliance.
C
Never clean the appliance under running water, do not rinse it or immerse it in water!
If the fan is dismantled, proceed in the reverse order of installation.
D
G
VS5130 | VS5140
EN
37