Information About The Fm Display; Alarm Clock Function; Setting The Alarm Clock - Imperial DABMAN 15 Bedienungsanleitung

7 FM RADIO RECEPTION

7.7 Information about the FM display

When listening to a UKW station, you can check the information shown on the display.
• Radio text (RT)
This is scrolling text information provided by the broadcaster. The information can be the name of an artist or
song, the name of the DJ, etc.
• Programme type (PTY)
such as 'Rock', 'Pop', 'Talk' or 'News'
• Station name or frequency
such as BR3 or 93. 30 M H z
• Audio mode
Stereo or Mono
• Time and date
Supplied by the broadcaster.
• Rechargeable battery status information
1 Repeatedly press the Menu button and release to cycle through the various information options.

8 ALARM CLOCK FUNCTION

8.1 Setting the alarm clock

Check that the radio has the correct time and date before setting an alarm.
With the radio switched on (not in standby mode):
1 Press and hold the Menu button.
2 Use the ◂ or ▸ button and switch to System - Settings.
Press the Select button.
3 Use the ◂ or ▸ button, highlight 'Alarm Clock' and press the Select button.
Select Alarm 1 or Alarm 2.
4 Briefly press the Select button to view the available alarm information and options.
5 Scroll with the ◂ or ▸ button to the desired alarm clock 1 or 2.
Press the Select button. Use the ◂ or ▸ button to change each setting and press
the Select button.
6 Make sure you have turned on the alarm before exiting the menu.
7 When an alarm clock has been set, an alarm clock symbol appears at the bottom of
the display.
In standby mode, the display shows you the alarm time (Alarm 1 and/or Alarm 2).
48
EN