Safety Instructions; Explanation Of Symbols - Imperial DABMAN 15 Bedienungsanleitung

2 SAFETY INSTRUCTIONS

2.1 Explanation of symbols

DANGER!
This signal word denotes
a hazard with a high
degree of risk and in the event of
non-compliance
with the instructions, will lead to
death or a
serious injury.
NOTE!
This signal word warns of
possible property damage and
points out
special descriptions for
the operation of the device.
The products marked with this
symbol
meet the requirements
of the guidelines of the European
Community.
Devices with this symbol may only
be operated
indoors in a dry
environment.
33
EN
WARNING!
This signal word denotes an
exposure to a medium
degree of risk and in the event of
non-compliance
with the instructions, may lead to
death or a
serious injury.
This symbol warns of dangers.
-
+
For devices with hollow plugs, this
symbol indicates the polarity
of the plug.
Outside minus / inside plus
ATTENTION!
This signal word denotes an
exposure to a low
degree of risk and in the event of
non-compliance
with the instructions may lead to
a minor
or moderate
injury.
Protection class II
Electrical devices with protection
class
II have a reinforced or
double insulation equal to the
rated insulation voltage
between active and touchable
parts (VDE 0100 part 410,
412.1). They usually have no
connection to the protective
conductor. Even if they have
electrically conductive surfaces,
they are protected from contact
with other live parts by reinforced
or double
insulation.