Megasat HD 7 Combo Bedienungsanleitung Seite 77

5. Specifications
DVB-S / S2
ƒ Frequency range: 950 - 2150 MHz
ƒ Input level range: 35 ~ 100 dBµV
ƒ LNB voltage: 13/18 V, max. 300 mA
ƒ Measuring the LNB current consumption in mA
ƒ LNB short-circuit indication and protection
ƒ Displays: CNR/LKM/CBER/LBER/PWR Strength/quality dBµV/dBm
ƒ DiSEqC 1.0 / 1.1 / 1.2 / USALS / Auto-DiSEqC
ƒ Unicable I & II (EN 50494 / EN 50607)
ƒ TV search mode: Auto, Blindscan, manual
ƒ Transponder control (identification of reception planes)
ƒ Calculation of rotation and inclination angle incl. compass
ƒ NIT control and satellite evaluation
DVB-T / T2 / C- / -C2
ƒ Frequency range: 42 - 1002 MHz
ƒ DVB-T displays: PWR/CBER/LBER/MER/TS Bitrate/TSID/ONID
ƒ DVB-C Displays: PWR, PBER, CNR, BER, Symbol rate
ƒ Level range: 30 ~ 100 dBµV
ƒ Scope display / Tilt display
ƒ Automatic and manual channel search
DAB / DAB+
ƒ DAB/DAB+-Signal Measuring and testing
ƒ DAB/DAB+-Channel play
ƒ Measured values for level dBµV, SNR, CNR, ACQ, EID
DiSEqC monitor
ƒ Measurement and control of DiSEqC switching commands
ENGLISH
37