Megasat HD 7 Combo Bedienungsanleitung Seite 59

3. Main menu
CNR
MER
CBER
LBER
Feed current
Feed voltage
ONID
TSID
Pilot pattern
FFT mode
TS Bit rate
Frequency-Offset
dBµV
DVB-T2 x-QAM 5/6 Shows the current DVB system (e.g. DVB-T2), demodulation
F1-button
F2-button
F3-button
F4-button
STORE
Shows the current C/N ratio of the signal.
Shows the current MER value.
Shows the current CBER value.
Shows the current LBER value.
Shows the current current consumption of the antenna.
Shows the current feed voltage to the antenna.
Shows the original network identification of the signal.
Shows the transport stream identifier
Shows the current pilot pattern value of the signal.
Shows the current FFT mode of the signal.
Shows the bit rate of the transport stream.
Shows the current FFT mode of the signal.
Shows the current power level of the input signal.
type and FEC value.
Press the key to display the help bar.
Press the key to enter the "Scope" menu.
Press the key to enter the constellation analysis.
Press the key to switch the unit of the power level between
dBµV and dBm.
Press the key to mute.
Press the key to save a screenshot.
ENGLISH
19