3. Main menu
3.3.3 Scope
This submenu shows you the current values of different frequencies at the same time.
On the left side, the active frequencies are displayed.
Power level
CNR
Signal strength
Signal quality
Frequency list:
The currently selected frequen-
cies are displayed at the top of the
screen. The lower list shows the fre-
quencies that are still available.
Removes a frequency
Adds a frequency
28
Tap this icon to exit the menu and return to the previous
menu.
Shows the current power level of the input signal.
Shows the current C/N ratio of the signal.
Shows the current signal strength of the transponder in %.
Shows the current signal quality of the transpo nder in %.
Tap this symbol to adjust the transponders. A new window
opens in which you can add or remove transponders.
ENGLISH