Megasat HD 7 Combo Bedienungsanleitung Seite 65

3. Main menu
CNR
CBER
LBER
ONID
TSID
TS Bit rate
Frequency-Offset
dBµV
DVB-C x-QAM 5/6
F1-button
F2-button
F3-button
F4-button
STORE
Shows the current C/N ratio of the signal.
Shows the current CBER value.
Shows the current LBER value.
Shows the original network identification of the signal.
Shows the transport stream identifier.
Shows the bit rate of the transport stream.
Shows the current FFT mode of the signal.
Shows the current power level of the input signal.
Shows the current DVB system (e.g. DVB-T2), demodulation
type and FEC value.
Press the key to display the help bar.
Press the key to enter the "Scope" menu.
Press the key to enter the constellation analysis.
Press the key to switch the unit of the power level between
dBµV and dBm.
Press the key to mute the sound.
Press the key to save a screenshot.
ENGLISH
25