Megasat HD 7 Combo Bedienungsanleitung Seite 54

3. Main menu
All available transponders of the selected satellite are listed on the left side of the screen.
Tap on a transponder to select it.
dBµV
DVB-S2 8-PSK 5/6
Astra 19.2E (z.B.)
CNR
LKM
CBER
LBER
Feed current
Feed voltage
Longitude
Latitude
DiSEqC-commands
TO THE EAST
TO THE WEST
STOP
EAST LIMIT
WEST LIMIT
DEACTIVATE LIMIT
MOVE TO CENTRE
GO TO POSITION
SAVE POSITION
14
Shows the current power level of the input signal.
Shows the current DVB system (e.g. DVB-S2), the demodulati-
on type and the FEC value.
Shows the name of the current satellite.
Shows the current C/N ratio of the signal.
Shows the current LKM value.
Shows the current CBER value.
Shows the current LBER value.
Shows the current current consumption of the LNB port.
Shows the current feed-in voltage of the LNB port.
Shows the local longitude. Tap the value to edit it.
Shows the local latitude. Tap the value to edit it.
Tap this area to send the command "Move East".
Tap this area to send the command "Move west".
Tap this area to send the command "Stop moving".
Tap this area to send the command "Limit for movement
to the east".
Tap this area to send the command "Limit for movement
to the west".
Tap this area to send the command "Deactivate limit".
Tap this area to send the command "Move to centre".
Tap this area to send the command "Move to the right".
Tap this area to send the command "Save position".
ENGLISH