Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Location and
Handling
This section describes precautions for installation location and handling. We recommend that you read this section prior to
using this machine.
Installation Precautions
Avoid Installing the Machine in the Following Locations
●
Avoid locations subject to temperature and
humidity extremes, whether low or high.
For example, avoid installing the machine near water faucets,
hot water heaters, humidifiers, air conditioners, heaters, or
stoves.
●
Avoid installing the machine in direct sunlight.
If this is unavoidable, use curtains to shade the machine. Be
sure that the curtains do not block the machine's ventilation
slots or louvers, or interfere with the electrical cord or power
supply.
●
Avoid poorly ventilated locations.
This machine generates a slight amount of ozone etc. during
normal use. Although sensitivity to ozone etc. may vary, this
amount is not harmful. Ozone etc. may be more noticeable
during extended use or long production runs, especially in
poorly ventilated rooms. It is recommended that the room be
appropriately ventilated, sufficient to maintain a comfortable
working environment, in areas of machine operation.
1
●
Avoid locations where a considerable amount of
dust accumulates.
●
Avoid locations where ammonia gas is emitted.
●
Avoid locations near volatile or flammable
materials, such as alcohol or paint thinner.
●
Avoid locations that are subject to vibration.
For example, avoid installing the machine on unstable floors
or stands.
●
Avoid exposing the machine to rapid changes in
temperature.
If the room in which the machine is installed is cold but
rapidly heated, water droplets (condensation) may form inside
the machine. This may result in a noticeable degradation in
the quality of the copied image, the inability to properly scan
an original, or the copies having no printed image at all.
Werbung
Inhaltsverzeichnis
