Control Panel Parts And Functions - Canon imageRUNNER ADVANCE C2020L Handbuch

Control Panel Parts and Functions

1
Quick Menu key
Press to display registered functions.
2
Main Menu key
Press to return to the Main Menu screen such as when
you want to switch functions.
3
Touch Panel Display
The settings screen for each function is shown on this display.
You can operate the machine by touching the screen.
Six function keys are displayed by default.
18
19
Status Monitor/Cancel key
Press to check the status of jobs or to cancel print jobs. Also,
press to check status of the machine, such as checking the
amount of paper remaining.
20
Volume Settings Key
Press to display the screen for adjusting settings such as the transmission
volume and fax sending/receiving alarm volume.
Edit Pen
9
Use when operating the touch panel display.
If you lose the edit pen, contact your local authorized Canon dealer. Do
not use an object with a sharp end on the control panel, such as a pencil
or ballpoint pen, in place of the edit pen.
Stop key
10
Press to stop a job in progress.
Start key
11
Press to start an operation.
Main Power Indicator
12
Lights when the main power is turned ON.
13
Error Indicator
Flashes or lights if there is an error in the machine.
6
USB Port
Use to connect memory media to the machine via USB.
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel
display.
7
Settings/Registration key
Press to specify settings/registration.
Control Panel Power Switch
5
(Sub Power Supply)
Press to set or cancel the Sleep mode.
For information on the Auto Sleep mode, see "Control Panel
Power Switch."
4
Numeric keys
Press to enter numerical values.
16 14
17
15
8 Counter Check key
Press to display the copy and print count totals on the
touch panel display.
Processing/Data Indicator
14
Flashes or blinks green when the machine is performing operations,
and maintains a steady green light when fax data is stored in memory.
15 Clear key
Press to clear entered values or characters.
Reset key
16
Press to restore the standard settings of the machine.
ID (Log In/Out) key
17
Press to log in/out when a login service is set.
10
11
13
12
9