Power Supply - Canon imageRUNNER ADVANCE C2020L Handbuch

Power supply

• Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull on or
excessively bend it, as this could cause electrical damage and result in a fire or electrical shock.
• Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt,
resulting in a fire or electrical shock.
• Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.
• Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock.
• Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical shock.
• Insert the power plug completely into the power outlet, as failure to do so may result in a fire or electrical
shock.
• Do not use power cords other than the power cord provided, as this may result in a fire or electrical shock.
• As a general rule, do not use extension cords. Using an extension cord may result in a fire or electrical shock.
• Do not use power supplies with voltages other than those specified herein, as this may result in a fire or
electrical shock.
• Always grasp the power plug when disconnecting the power cord. Pulling on the power cord may expose
or snap the core wire, or otherwise damage the power cord. If the power cord is damaged, this could cause
current to leak, resulting in a fire or electrical shock.
IMPORTANT
Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power
plug, you will be unable to unplug it in an emergency.
Handling
• Do not attempt to disassemble or modify the machine. There are high-temperature and high-voltage
components inside the machine which may result in a fire or electrical shock.
• If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF
the main power switch, and disconnect the power cord from the power outlet. Then, contact your local
authorized Canon dealer. Continued use of the machine in this condition may result in a fire or electrical
shock.
•
Do not use highly flammable sprays near the machine. If gas from these sprays comes into contact with the
electrical components inside the machine, it may result in a fire or electrical shock.
• To avoid damage to the power cord and creating a fire hazard, always turn OFF the main power switch, and
unplug the interface cable when moving the machine. Otherwise, the power cord or interface cable may be
damaged, resulting in a fire or electrical shock.
• Make sure that the power plug is firmly inserted into the power outlet if the machine was moved. Do not use
the machine while the connection is loose, as doing so may cause a fire.
• Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill water, liquids,
or flammable substances (alcohol, benzene, paint thinner, etc.) inside the machine. If these items come into
contact with a high-voltage area inside the machine, it may result in a fire or electrical shock. If these items
are dropped or spilled inside the machine, immediately turn OFF the main power switch, and disconnect the
power cord from the power outlet. Then, contact your local authorized Canon dealer.
1