Protecting The Environment; Ec Declaration Of Conformity - Black+Decker HP362 Bedienungsanleitung

ENGLISH
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
from the interior.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Batteries
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
Run the battery down completely, then remove it from
the tool.
NiCd, NiMH and Lithium Ion batteries are recyclable.
Take them to any authorised repair agent or a local
recycling station.
8
Technical data
Voltage
Output torque (max)
No load speed
Bit holder
Weight
Battery
Charger
Voltage
Approximate charging time
Weight

EC declaration of conformity

Black & Decker declares that these products conform to:
98/37/EC, EN 60745
Level of sound pressure according to EN 60745:
Sound pressure (L ) 68.35 dB(A), uncertainty (K) 3 dB(A)
pA
Acoustic power (L ) 81.35 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN 60745:
Screwdriving without impact (a
uncertainty (K) = 1.5 m/s²
Drilling into Metal (a )= 0.628 m/s², uncertainty (K) = 1.5 m/s²
h
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement
is in addition to and in no way prejudices your statutory
rights. The guarantee is valid within the territories of the
Member States of the European Union and the European
Free Trade Area.
HP362
Vdc 3.6
Nm 6
rpm 0-200, 0-600
mm 6.35
kg 0.48
type A36
Vac 230
hr 6
kg 0.24
HP362
)= 0.98 m/s²,
h
Kevin Hewitt
United Kingdom
01-11-2007