Herunterladen Inhalt Inhalt Diese Seite drucken

Viessmann 5077 Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Als Beispiel: Es gibt standardmäßig im Decoder unter
anderem drei Profile, die die Leuchtdioden der Plati-
ne in eine Dreiergruppe, eine Fünfergruppe und eine
weitere Dreiergruppe zusammenfassen. „Profil D" ist
das Profil, dass die ersten drei LEDs zusammen an-
steuert, „Profil E" ist das Profil, dass die mittleren fünf
LEDs ansteuert und „Profil F" steuert die letzten drei
LEDs an. Diese drei Profile sind in der Standardkon-
figuration des Decoders über die Funktionstasten F3,
F4, und F5 erreichbar.
Nun macht es aber auch durchaus Sinn, eine Taste
zu haben, mit der man alle elf LEDs gleichzeitig ein-
schalten kann. Wir nehmen dazu die Funktion F2 und
hinterlegen in der zugehörigen CV 36 den Wert 56.
Diese Zahl errechnet sich aus den Wertigkeiten der
drei Profile, die wir kombiniert haben: Dem Wert 8 für
Profil D, dem Wert 16 für Profil E und dem Wert 32
für Profil F: 8+16+32 = 56. Es werden also beim Drü-
cken der Funktionstaste F2 drei Profile gleichzeitig
aufgerufen! Natürlich können Profile auch mehrfach
den Funktionstasten zugeordnet werden.
Eine Übersicht über die Profile und ihre Wertigkeit
finden Sie in der CV-Tabelle, hier eine Übersicht über
die Bedeutung der standardmäßigen Zuordnung:
F0: Spitzenlicht / Schlusslicht = Profil A / B
richtungsabhängig
F1: AUX = Profil C
F2: alle 11 LEDs
F3: ersten 3 LEDs = Profil D
F4: mittlere 5 LEDs = Profil E
F5: letzten 3 LEDs = Profil F
F6: Notbeleuchtung = Profil G
F7: Zufallssteuerung Großraumwagen = Profil H
Die Profile A bis H sind in den CVs 50 – 57 abgelegt,
siehe CV-Tabelle Seite 17.
Sie können die Profile aber nach eigenem Belieben
mit anderen Eigenschaften versehen. Eine Änderung
der Eigenschaften wirkt dann natürlich auch auf alle
Funktionstasten, die diese Profile aufrufen, wie im
obigen Beispiel gezeigt.
Die standardmäßig hinterlegten Eigenschaften sind
wie folgt:
Werte < 200: Definition der Gruppierung von LEDs.
Es wird zweistellig die Nummer der ersten LED ge-
nommen, die leuchten soll und die einstellige Anzahl
der LEDs, die danach leuchten sollen, wird ange-
hängt. Beispiele: Profil D („erste drei LEDs"): erste
LED die leuchtet, bedeutet „1", drei LEDs die leuch-
ten bedeutet „3" – also „13" als Wert für die CV 53.
Oder Profil E („mittlere 5 LEDs"): 3 LEDs bleiben aus,
die vierte LED ist die erste, die leuchtet und insge-
samt leuchten 5 – also „45" als Wert für CV 54 usw.
Wert 200: Notbeleuchtung 1: Alle LEDs mit niedriger
Helligkeit an – überschreibt alle anderen Profile.
with three light scenes consisting of two groups of
three LEDs (at either end) and one group of five (in
the middle). Light scene "D" controls the first three
LEDs together, light scene "E" controls the group of
five LEDs and light scene "F" controls the second
group of three LEDs. In the standard configuration
these three light scenes can be switched with the
function buttons F3, F4 and F5.
Nevertheless it may also be useful to have one func-
tion button switching all eleven LEDs simultaneously.
We choose F2 for this purpose and enter the value
56 in the appropriate CV, namely CV 36. This value is
calculated by adding the values of the individual light
scenes that we have now combined: Value 8 for light
scene D, value 16 for light scene E and value 32 for
light scene F: 8+16+32 = 56. Thus pressing function
button F2 calls up three light scenes simultaneously!
Of course one may assign the light scenes to more
than one function button at the same time.
The CV table provides an overview over the different
light scenes and their values. Below please find the
standard allocation (ex works):
F0: Headlights / Rear lights = Lightscene A / B, de-
pending on the direction
F1: AUX = Light scene C
F2: all 11 LEDs
F3: First group of 3 LEDs = Light scene D
F4: Centre group of 5 LEDs = Light scene E
F5: Last group of 3 LEDs = Light scene F
F6: Emergency lighting = Light scene G
F7: Random control for saloon coach = Light
scene H
Light scenes A through H are stored in CVs 50 – 57,
see CV table page 17.
You may modify the light scenes according to your
personal preference. Such changes will also be ef-
fected by all function buttons that control these light
scenes as outlined in the above example.
As a standard the following properties have been
configured:
Values smaller than 200: Definition of LED groups.
Take the number of the first LED to be lit as a two dig-
it number followed by the one digit number of LEDs to
be lit in total.
Example: Light scene D (group of first three LEDs):
First LED is to be lit means "1", three LEDs should be
lit in total means "3" – therefore value "13" has to be
entered in CV 54, etc.
Value 200: Emergency lighting 1: All LEDs to be lit
with reduced brightness – overwrites all other light
scenes.
Value 201: Emergency lighting 2: Every second LED
to be lit with reduced brightness – overwrites all other
light scenes.
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

50765078

Inhaltsverzeichnis