Operation - Klarstein HEKTOR Handbuch

EN
20

OPERATION

Timer Licht
(1) Power on
After you have connected the cooker hood to the main supply, the backlight of button
will turn on. The backlight will turn off after 30 seconds without any operation and the
cooker hood will enter into stand-by mode.
(2) Turn the light on
Press the LIGHT button once, lights will be on. Press the button again; lights will be off.
(3) Speed selection
Turn on hood and select the speed, use SPEED button, the motor works at 3 speeds,
low, mid and high, and the LED display will display [1] > [2] > [3].
• Press LIGHT button once, the motor starts to work at low speed and the LED display
will display [1].
• Press LIGHT button again base on the low speed, the motor works at mid speed
and the LED display will display [2].
• Press LIGHT button again base on the mid speed, the motor works at high speed
and the LED display will display [3].
• Go on pressing LIGHT button, the hood works at low speed again and it repeat:
low > mid > high > low...
(4) Device memory
Press POWER button once, the hood will work at the speed which it works last time.
Press POWER button again, the hood stop working.
Anzeige Geschwindigkeit Power