Standard Accessories; Specifications - HIKOKI GM 13Y Bedienungsanleitung

English
Reduce dust exposure:
Some dust created by using this power tool
may contain chemicals known to cause
cancer, allergic reaction, respiratory disease, birth
defects or other reproductive harm. Some
examples of these chemicals are: Lead from lead-
based paints, crystalline silica from bricks and
cement and other masonry products, arsenic and
chromium from chemically-treated lumber, hard
wood like oak or beech, metals, asbestos.
The risk from these exposures depends on how
long you or bystanders are being exposed.
Do not let particles enter the body.
To reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved
safety equipment, such as dust masks that are
specially designed to filter out microscopic
particles.
Observe the relevant guidelines for your material,
staff, application and place of application (e.g.
occupational health and safety regulations,
disposal).
Collect the generated particles at the source, avoid
deposits in the surrounding area.
Use suitable accessories for special work
(Accessories), thus less particles enter the
environment in an uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- For efficient dust collection, use a suitable
HiKOKI (L-class and over) vacuum cleaner
together with this power tool.
- Do not direct the escaping particles and the
exhaust air stream at yourself or nearby persons
or on dust deposits.
- Use an extraction unit and/or air purifiers
- Ensure good ventilation of the workplace and
keep clean using a vacuum cleaner Sweeping or
blowing stirs up dust
- Vacuum or wash the protective clothing Do not
blow, beat or brush
Name of Parts (Fig. 1
1 Bar auxiliary handle
2 Thumb screws of the bar auxiliary handle
3 Locking discs of the bar auxiliary handle
4 Threaded holes on gear housing
5 2-hole spanner
6 Adjusting nut
7 Diamond cup wheel
8 Support flange
9 Spindle
10 Spring-mounted ring brush
11 Spindle locking button
12 Extractor connection piece
13 Opening segment (for working close to walls)
14 Safety guard
15 Handle
16 Trigger (for switching on and off)
17 Electronic signal indicator
18 Speed adjustment wheel
6
Fig. 3)
–
Symbols
WARNING
The following show symbols used for the machine. Be sure
that you understand their meaning before use.
GM13Y: Concrete Grinder
V Rated voltage
Alternating current
n
Rated speed
-1
min Revolution or reciprocations per minute
Switching ON
Switching OFF
Class II tool

Standard Accessories

In addition to the main unit (1 unit), the
package contains the accessories listed in the
below.
○
2-hole spanner ................................................1
○
Plastic case .....................................................1
○
Diamond cup wheel* .......................................1
* (WT) specifications is excluded.
Standard accessories are subject to change without
notice.

Specifications

Model
1
Voltage*
Rated input power
No-load speed (maximum
speed)
Max. diameter of accessory
Spindle thread
Length of the grinding spindle
Weight without mains cable*
*1 Be sure to check the nameplate on product as it
is subject to change by areas.
*2 Weight: According to EPTA-Procedure 01/2003
Note: Due to HiKOKI's continuing program of
research and development, the specifications
herein are subject to change without prior notice.
GM13Y
– ∼
220 240 V
1900 W
– -1
3800 8200 min
125 mm
M14
19 mm
2
3.6 kg