Set Date/Time - VANTRUE OnDash N2 Pro Bedienungsanleitung

4.3 Set Date/Time

Open the MENU interface, navigate to"System
Setup">"Time & Date", and press the OK button
to set the date/time. Navigate UP or DOWN to
select date and time values. Press OK to confirm
and proceed. To finish setup, just press the MENU
button to exit.
Note: Date format is DD/MM/YY with the time in
24 hour format.
4.4 Switch Recording Mode/Resolution
By default (DUAL CAM RECORDING mode),
1080P+1080P resolution will show on the screen,
both cameras will capture road front and inside
cabin at dual 1920x1080P (30fps).
0.33/59.11GB
Event
Normal
Photo
All
M
BACK
03 / 05 / 2019
10 / 48 / 08
DD/MM/YY
M
BACK
- 16 -
Files
ENTER
OK
Time&Date
ENTER
OK