Event Recording - VANTRUE OnDash N2 Pro Bedienungsanleitung

Please note: If IR lights on, the video footage of the
cabin will turn into black and white.

4.8 Event Recording

Critical event detection is triggered by the G-Sen-
sor (Gravity Sensor) and will auto-detect vehicle
impacts and collisions. This will cause the camera
to protect the current video clip from being
overwritten by locking it and saving the footage in
the "Video/Event" folder.
The G-Sensor sensitivity is adjustable with 3 settings:
Low, Medium, and High – it is set to Medium by
default. The G-Sensor can also be deactivated in
"Record Setup">"G-Sensor Set".
!
Event videos are stored in the "Video/Event"
folder, and cannot be automatically overwritten.
Note: The camera will auto overwrite old Event videos
once the Event folder has accumulated 30% of the card
capacity. Please regularly transfer important videos to
Night mode off
Night mode auto on/off
A
Night mode on
1080P+1080P
3
OK
P
0
03:07:29
- 20 -
0:23
01/01/2019