Time Lapse - VANTRUE Element 1 Bedienungsanleitung

EN [Normal Recording Time = Time Lapse Recording Time (Sec) x Recording
Framerate FPS x Time Lapse Option]
(Time should be converted into seconds)
Note:
1. The time unit of the calculation formula is seconds, so the final normal
recording time calculated is also in seconds. If you need to convert it
into other time units, please check the units and convert.
2.
The low framerate mode is similar to the time-lapse recording function,
but the difference is that there is no 5-minute entry mechanism for
time-lapse recording, which will be directly turned on after setting.
3.
In low framerate mode, the camera also needs a stable power supply.
Once the power is off or exhausted, the camera will shut down.

4.2.4 Time Lapse

When time lapse is selected, the camera will record according to your
selection among 1FPS/5FPS/10FPS/15FPS.
For example, if you select 1FPS and the current video resolution framerate
is 30FPS, the recorder will generate a 30FPS video per second. Low
framerate mode can greatly preserve the integrity of the video and save
space on the memory card.
2560x1440P 30FPS
120
00:00:37
05-01-2022 14:09:07 MP/H
- 27 -