Abbrevations; Safety Instructions; General Notes On Damages To Property And Products; Scope Of Delivery - Bosch Rexroth PRC 7 00-L /W 1000 Serie Typspezifische Anleitung

28/46 Bosch Rexroth AG | Electric Drives and Controls
specific, configurable supervision, it must first be defined which PSF,
UIP and/or FQF values are to be detected as basically problematic
by the weld timer. The weld timer generally accounts for actual
values within the "conditional tolerance range" of the corresponding
monitored value only. In addition, you have to define the threshold for
the weld timer that has to be exceeded in order to actually signal the
problems occurred as an error. One differentiates between: •
program-specific Q Stop • component-specific Q Stop
STC TEACH Sheet Thickness Combination, teaching
Process quality.
UIP
Value for the welding quality, derived from the resistance
characteristic of the current weld.
UIR UI control
WIC Weld Interface Controller (internal realtime bus)
1.3.4

Abbrevations

For information on the abbreviations used in this documentation, refer to Tab. 1:
Required and supplementary documentation Rexroth PRC7000 Process
Resistance Welding Control Instructions.
2

Safety instructions

For safety instructions, refer to Tab. 1: Required and supplementary
documentation Rexroth PRC7000 Process Resistance Welding Control
Instructions and Rexroth Weld Timer Safety and user information.
3 General notes on damages to property and
products
For general notes on damages to property and products, refer to Tab. 1: Required
and supplementary documentation Rexroth PRC7000 Process Resistance
Welding Control Instructions and Rexroth Weld Timer Safety and user
information.
4

Scope of delivery

For scope of delivery, refer to Tab. 1: Required and supplementary
documentation Rexroth PRC7000 Process Resistance Welding Control
Instructions.
R911404358 | PRC 7x00-Lx/Wx-1000