Startup; Versions (Indicated On Product Label) - Balluff BTL5-s1 M B/Z-DEX K /KA Serie Betriebsanleitung

BTL5-S1_ _-M_ _ _ _-B/Z-DEX_-K_ _/KA_ _
Micropulse Transducer - Rod Style
5

Startup

5.1 Check connections
5.2 Turning on the system
5.3 Check output values
6

Versions (indicated on product label)

Type: BTL5-S102-M0450-B-DEXA -K05
example: BTL5-S102-M0450-B-DEXA-SA_ _ _-K05
10
5.4 Check functionality
5.5 Fault conditions
5.6 Maintenance
The measuring principle of the
transducer makes it mainte-
nance- and wear-free. The op-
erator is responsible for regularly
checking for signs of damage or
malfunction. If any damage or
wear is found, the transducer
must be immediately taken out
of operation.
-KA05
Ignition Class "d"
Flameproof enclosure
5.7 Repair
For reasons of safety the trans-
ducer is not user-serviceable.
Repairs to the transducer or the
connection cable are to be per-
formed only by service techni-
cians from Balluff GmbH.
The transducer's housing and
cable fitting may not be opened
or loosened! This is why the fol-
lowing warnings are affixed over
the gap in the housing and on
the cable fitting: