Springlane Mia Bedienungsanleitung Seite 23

Heat milk and make milk froth
1.
3.
5.
1. Lift the lid off the milk container.
2. Place the desired stirrer insert into the
milk container. Use the smooth insert
for simple heating of the milk and the
ribbed one for hot or cold milk froth.
3. Pour in the desired amount of milk.
Always make sure that the minimum
capacity (100 ml) is reached and that
the maximum capacity (250 ml) is not
exceeded to prevent overheating and
overflowing.
4. Close the milk container with the lid.
5. Centre the filled milk container on the
magnetic heating plate of the base
station and insert the power plug into
the socket.
2.
4.
6.
6. Activate the desired programme by
pressing the operating button (see
section on programme selection).
The stirring and frothing process
begins after activation. After 1­4
minutes (depending on the filling
quantity and the milk's initial
temperature), the device stops
automatically, and the signal light
turns off. The milk is now ready.
Press the operating button again once to
prematurely terminate the programme –
the device will stop immediately.
Prepare hot drinking chocolate
1.
3.
5.
2.
4.
6.
23