Installation; Preliminary Operations - Gaggia BRERA 037RG Bedienungsanleitung

INSTALLATION

Machine Packaging
The original packaging has been designed
and constructed to protect the machine
during transport. We recommend keep-
ing the packaging material for possible
future transport.

Preliminary Operations

• Remove the coffee bean hopper cover
and the drip tray with grill from the
packaging.
• Remove the coffee machine from the
packaging and position it in a place
that meets the requirements described
in the safety regulations.
• Place the drip tray with grill into its
appropriate seat on the machine. Make
sure it is fully inserted to its limit stop.
• Insert the Pannarello on the steam
wand.
• Insert the coffee bean hopper cover.
et only when indicated and check that
the power button is switched to "0".
tions of all the warnings the machine
displays to the user via the lights on
the control panel display (see section
"Display Warnings").
on. Wait a couple of minutes after
turning on/off, as the machine will be
carrying out a rinse/self-cleaning cy-
cle (see section "Rinse/Self-cleaning
Cycle").
• 24 • • 24 •
4219-465-04381 GAG. MAN. BRERA IT-EN-DE-FR Rev.00.indd 24
Note: Insert the plug in the
machine and in the wall sock-
Important note: Carefully
read the explanatory descrip-
NEVER remove the drip tray
when the machine is turned
• Remove the water tank from its seat.
• Rinse and fill it with fresh water mak-
ing sure that it is not filled exceeding
the MAX level indicated in the water
tank. Put the water tank back in its
seat.
Fill the tank only with fresh,
non-sparkling water. Hot wa-
ter or any other liquid may damage
the tank and/or the machine. Do not
turn on the machine when the tank
is empty: Make sure there is enough
water in the tank.
• Remove the coffee bean hopper cover.
Note: The hopper may be pro-
vided with different safety
features according to the regulations
of the country of use of the machine.
• Slowly pour the coffee beans into the
hopper.
Only coffee beans must be
put into the coffee bean hop-
per. Ground coffee, instant coffee or
any other object may damage the
machine.
• Replace the coffee bean hopper cover.
• Insert the plug into the socket on the
back of the machine.
• Insert the plug of the other end of the
cable into a wall socket with suitable
power voltage.
14/10/2020 14:48:44