Choosing A Suitable Location; Appliance Dimensions And Minimum Distances - hanseatic HFD18070EI Gebrauchsanleitung

Page EN-30 Start-up

Appliance dimensions and minimum distances

A: 1808 mm B:
C: 300 mm D:
E: 1020 mm F:
G: 100 mm H:
I: 1185 mm

Choosing a suitable location

Minimum space requirement
– To prevent a flammable gas-air mixture
from forming following a leakage in the
refrigeration circuit, the installation space
must have a minimum size of 1 m
8 g of refrigerant in compliance with the
EN 378 standard. The amount of refrig-
erant contained in your appliance can be
found on the product fiche at the end of this
user manual.
– The appliance must only be placed on a
level and firm surface. The surface must be
713 mm
– Suitable locations are dry, well-ventilated
731 mm
100 mm
– Unsuitable locations are ones with direct
135°
– The following minimum distances must be
– If you would like to reduce these distances,
per
3
– If you would like to reduce the distance to
– If underfloor heating is installed at the set-
strong enough to support the appliance's
weight when fully laden.
areas that are cool if possible.
sunlight or which are directly next to an
oven, hob or radiator.
maintained:
– to electric stoves
– to oil and coal burning stoves 300 mm
– to other refrigeration appliances100 mm
– to washing machines/
dishwasers
you can fit an insulation plate between the
appliances.
oil or coal-fired stoves, you can fit an insu-
lation plate between the appliances.
up location, place the cooling appliance on
an insulation plate made from solid mate-
rial.
100 mm
100 mm