Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Battery Safety Warnings; Transporting Lithium Batteries; Maintenance; Residual Risks - Ryobi RBL36JB Originalanleitung

Vorschau ausblenden Andere Handbücher für RBL36JB:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
BLOWER SPECIFIC SAFETY WARNINGS
Wear a face filter mask in dusty conditions
to reduce the risk of injury associated with
the inhalation of dust.
Slightly
dampen
conditions.
Do not point the blower nozzle in the
direction of people or pets.
Never place objects inside the blower
tubes.
Do not operate the product near open
windows.
Use the full blower nozzle extension so that
the air stream can work close to the ground
and perform effectively.
Do not place blower on top of or near
loose debris. Debris can be sucked into the
intake vent, resulting in possible damage
to the product.
ADDITIONAL BATTERY SAFETY
WARNINGS
WARNING
To reduce the risk of fi re, personal injury,
and product damage due to a short circuit,
never immerse your tool, battery pack or
charger in fl uid or allow a fl uid to fl ow inside
them. Corrosive or conductive fl uids, such
as seawater, certain industrial chemicals,
and bleach or bleach-containing products,
etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
Stop the product, remove the battery, and
allow it to cool before storing or transporting.
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents,
such as garden chemicals and de-icing
salts. Do not store outdoors.
For transportation in vehicles, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local
and national provisions and regulations.
surfaces
in
dusty
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.

MAINTENANCE

WARNING
Use only original manufacturer's replacement
parts, accessories, and attachments. Failure
to do so can cause possible injury and poor
performance, and may void your warranty.
WARNING
Servicing
requires
knowledge and should be performed only by
a qualifi ed service technician. For service,
bring the product to an authorised service
centre. When servicing, use only identical
replacement parts.
Do not make adjustments and repairs not
described in this manual. For other repairs,
contact an authorised service agent.
After each use, clean the product with a
soft, dry cloth.
Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
ensure that the product is in safe working
condition. Any part that is damaged should
be properly repaired or replaced by an
authorised service centre.
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.

RESIDUAL RISKS

Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
Injury caused by vibration. Always use the
right tool for the job and use designated
handles.
extreme
care
and
English |
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis